PGF-3000｜HIOS

Feature

With a built-in torque sensor, pass / fail judgment is performed each time a screw is tightened.

It is possible to detect screw tightening defects such as insufficient torque, screw floating, and diagonal tightening, which are difficult to judge visually.
The screw tightening work data can be output to a PLC or PC.
You can control the forward / reverse / rotation speed of the driver from the outside.
* In addition to this machine, the control unit judgment device "PG-01" and the interface "PGF-SUBBOX" are required.

PGF-3000

Specification

Download

Output Torque Range N・m kgf・cm	Torque Switching	Unloaded Rotation Speed(r.p.m) Low High	Screw Size(mm) Screw size Tapping	Bit (selectable)※ Hios shank	Power Supply Model	External Dimensions(mm) Grip Length(mm)	Weight(g)	Accessories Cord length(m)	Torpue Range Table
0.2-0.55 2-5.5	Stepless Adjustment	115-325 625-950	1.7-2.3 2-2.3	H4	BLT-AY-61	40 190	363	3m(10P)

Output Torque Range

N・m
kgf・cm

Torque Switching

Unloaded Rotation Speed(r.p.m)

Low
High

Screw Size(mm)

Screw size
Tapping

Bit (selectable)※

Hios shank

Power Supply

Model

External Dimensions(mm)

Grip
Length(mm)

Weight(g)

Accessories

Cord length(m)

Torpue Range Table

0.2-0.55
2-5.5

Stepless Adjustment

115-325
625-950

1.7-2.3
2-2.3

BLT-AY-61

3m(10P)

Relation between the number of rotation (r.p.m) of the screwdriver
(reference values)

Rotation setting		r.p.m
LOW 11 steps	05	115
	06	135
	07	155
	08	175
	09	200
	10	220
	11	240
	12	260
	13	280
	14	300
	15	325
HIGH 11 steps	20	625
	21	655
	22	700
	23	730
	24	765
	25	800
	26	840
	27	950
	28	950
	29	950
	30	950

※For the unloaded rotation speed, consider the value in the chart with the range of ±10%.

Series Comparison

Model	Output Torque Range N・m lbf・in kgf・cm	Unloaded Rotation Speed(r.p.m) Low High	Screw Size(mm) Screw size Tapping	Bit Drive Hios shank Hex shank
PGF-3000	0.2-0.55 - 2-5.5	115-325 625-950	1.7-2.3 2-2.3	H4 −
PGF-5000	0.4-1.2 - 4-12	115-320 690-985	2-3 2-2.3	H4 −
PGF-7000	1-2.8 - 10-28	210-595 645-935	2.6-5 2.6-4	H5 and 5HEX(both can be used) 1/4HEX

Model

Output Torque Range