- 1.Quick release cord
（DC TYPE） -
The screwdriver cord features a quick release allowing maintenance to be performed easily
(The cord on the VB Series is permanently connected and cannot be detached).- 5P (pin)
Standard screwdriver - 6P (pin)
Screwdriver for use with screw counter
- 2.Employs an antistatic body case
(standard specifications) - The brushless series uses an antistatic body case to prevent the accumulation of static electricity
(excludes the VB-1820PS, VB-3012PS, VB-4504PS)
- 3.Trigger type
- Lever start type (L) screwdrivers are operated by pulling the lever with your finger. Push-to start type (PS) screwdrivers are operated by pushing the button. Certain models of the BL Series allow either start method to be selected (excluding the BL-2000)
- 4.Torque adjustment nut for fine tuning
- The tightening torque can be steplessly adjusted across a wide range.
Repeatable high precision provides reliable screw tightening.
- 5.Bit
-
- 1.Quick release cord
（DC TYPE） -
The screwdriver cord features a quick release allowing maintenance to be performed easily
(The cord on the VZ Series is permanently connected and cannot be detached).- 5P (pin)
Standard screwdriver - 6P (pin)
Screwdriver for cell-type production
- 2.Trigger type
- Lever start type (L) screwdrivers are operated by pulling the lever with your finger. Push-to start type (PS) screwdrivers are operated by pushing the button.
- 3.External carbon brush
- Externally located for ease of replacement. The carbon brush has a lifetime of about 1 million operations, depending on the operating conditions.
- 4.Torque adjustment
- The tightening torque can be steplessly adjusted across a wide range.
Repeatable high precision provides reliable screw.
- 5.Bit
-
Brush screwdriver
Variations
-
Anti-static electricity features
Anti-electrostatic material used in manufacture of the body case, switches, lever and power cord to protect against electrostatic charge accumulations.
[Surface resistance:10(4)Ω] -
Clean room, anti-static electricity features
The screwdrivers is equipped with a vacuum pipes as well as a suction head to insure complete remover of fine particles generated by the screw tightening process in clean rooms.
[Surface resistance:10(4)Ω] [Cleanliness class 100] -
Suction, anti-static electricity features
The vacuum assists in picking screws up. Anti-ferrous metallic screws such as stainless steel screws can also be picked up with the suction device, while dust generated during screw tightening is also eliminated.※ For adding suction parts with your own drivers. please purchase mouthpiece, bit, suction attachment that match with each driver.
Please also be noted that a suction attachment is to be added by user-side.Placing an order for models that of suction parts are already attached, please refer to the following model numbers. -
Noiseless type
These reduce electrical noise generated by the screwdriver.
Brushless screwdriver
Variations
-
Anti-static electricity features
Anti-electrostatic material used in manufacture of the body case, switches, lever and power cord to protect against electrostatic charge accumulations.
[Surface resistance:10(4)Ω] -
Clean room, anti-static electricity features
The screwdrivers is equipped with a Vacuum pipes as well as a suction head to insure complete remover of fine particles generated by the screw tightening process in clean rooms
[Surface resistance:10(4)Ω] [Cleanliness class 100] -
Suction, anti-static electricity features
The vacuum assists in picking screws up. Anti-ferrous metallic screws such as stainless steel screws can also be picked up with the suction device, while dust generated during screw tightening is also eliminated.※ For adding suction parts with your own drivers. please purchase mouthpiece, bit, suction attachment that match with each driver.
Please also be noted that a suction attachment is to be added by user-side. -
Clean room, anti-static electricity features
May add a suction with more varieties. -
Clean room
May add a suction with more varieties.
-
RoHS compliant
This product conforms RoHS Directive
-
Anti-electrostatic measures ●Surface resistance is less than 10(4)Ω
Anti-electrostatic plastic material used in manufacture of the body case, code, and switches and lever.
-
Antistatic body case ●Surface resistance is less than 3x10(12)Ω
The screwdriver body uses an antistatic body case to prevent the generation of static electricity, which is suitable for the assembly of precision equipment and electronic parts.
-
CE
This product meets all the essential requirements of the relevant European Directive as to CE marking.
-
UL(Underwriters Laboratories)
This product is certified for UL.
To customers who export HIOS electric screwdrivers to China
Before you export your HIOS screwdrivers to China, they must be certified by China Compulsory Certification Standards CCC (hereinafter CCC).
The CCC certified models are different in specification from the standard models. Also, the CCC mark labels shall be put on the name plates. Please note that non-certified models and models without the CCC mark labels cannot be exported to China or used within China.
List of China Compulsory Certification Standards CCC Certified Models
The CCC certified models are different in specifications and order codes from the standard models. Be sure to use the proper order codes for the CCC certified models or write 'CCC' after the model No. on your order form.
Electric Screwdriver
DC TYPE
| Certified model | |
|---|---|
| BLG-BC2 | BLG-4000BC2 |
| BLG-5000BC2 | |
| BLG-BC1 | BLG-4000BC1 |
| BLG-5000BC1 | |
| BLG | BLG-4000 |
| BLG-5000 | |
| BLG-4000-OPC | |
| BLG-5000-OPC | |
| BL | BL-2000 |
| BL-3000 | |
| BL-5000 | |
| BL-7000 |
AC TYPE
| Voltage | Certified model | |
|---|---|---|
| VB | 100V | VB-1510 |
| VB-1510PS | ||
| 220V | VB-1510B | |
| VB-1510PSB | ||
| 100V | VB-1820 | |
| VB-1820PS | ||
| 220V | VB-1820B | |
| VB-1820PSB | ||
| 100V | VB-3012 | |
| VB-3012PS | ||
| 220V | VB-3012B | |
| VB-3012PSB | ||
| 100V | VB-4504 | |
| VB-4504PS | ||
| 220V | VB-4504B | |
| VB-4504PSB |
DC TYPE
| Certified model | |
|---|---|
| CL | CL-2000 |
| CL-3000 | |
| CL-4000 | |
| CL-6500 | CL-6500PS |
| CL-7000 | |
| CL-7000PS | |
| α | α-4500 |
| α-6500 | |
| α-6500PS |
AC TYPE
| Voltage | Certified model | |
|---|---|---|
| VZ | 100V | VZ-1510 |
| VZ-1510PS | ||
| 220V | VZ-1812 | |
| VZ-1812SB | ||
| 100V | VZ-1820 | |
| VZ-1820PS | ||
| 220V | VZ-3007 | |
| VZ-3007PS | ||
| 100V | VZ-3012 | |
| VZ-3012PS | ||
| 220V | VZ-4504 | |
| VZ-4504PS | ||
| 100V | VZ-4506PS |
Power Supply for DC Screwdriver
| Voltage | Certified model |
|---|---|
| AC100V-240V | T-45BL |
| AC100V-240V | T-30BL |
| AC100V-240V | T-70BL |
| AC100V-240V | CLT-30 |
| AC100V-240V | CLT-60 |
| AC220V〜 | MC-70L |
As always, thank you for your business and cooperation.
The Administrative Measures for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products (known as China RoHS 2) has come into force on July 1st, 2016 and no matter if it is CCC certified or not, most of HIOS products for China are subject for China RoHS 2.
1. China RoHS 2
China RoHS2 has come in force on July 1st, 2016.
HIOS products such as Electric Screwdriver, Power Supply, Screw Counter, Torque Meter, Screw Feeder, etc. are subject for China RoHS 2 and it requires the followings to sell the products in China.
①Packing boxes for the HIOS products above should be marked with the orange symbol logo with a number.
②A table of the content and names of hazardous substances needs to be attached or enclosed in the packing boxes.
Note: HIOS products without the both (a)(b) cannot be sold and used in China.
2.What HIOS does
HIOS has been implementing the both(a)(b) on the products for China delivered on and after July 1st, 2016.
3．Products delivered on and before June 30th, 2016
Products manufactured before July 1st, 2016 are not subject for China RoHS 2.
They can be sold and used in China by proving that they are manufactured before July 1st, 2016.
The followings are how to check the manufacturing date of the HIOS products.
CCC certified Screwdriver・・It is indicated on the table of the content and names of hazardous substances enclosed in the packing box.
Torque Meter・・・・・ The date of calibration is indicated on the test report enclosed in the packing box.
Others・・・・・Please contact us with its model name and serial no.
If you have any questions or need additional information, please contact our sales department.